My suit is a custom order Magnoli Clothiers GB1 Ripstop Fabric Suit, GB Patches, Yellow Hose, Hose Connector
I have a Blue Mountain Black Undershirt bought at Tractor Supply and an optional Fruit of the Loom Mens Premium Thermal Union Suit for a Ghostbusters 2 look
The belt is a Magnoli Clothiers LIght Grey Pistol Belt
The boots are Rocky Boots Rocky Side Zipper Jump Boot with some material on the flap cut away and the zipper and snaps painted silver
GB Fans Grey Elbow Pads & Chemical Gloves
I have an optional AlexGear Frozen Empire Paul Rudd Red Jacket with GB Patches, a GB Fans Black Pistol Belt, and an Imperial Tech Shop Pocket Gizmo for a Frozen Empire movie look
Lastly, I have an optional Blue Lab Coat and Safety Yellow/Black Stripe Tie for a GB1 Commercial look.
My belt is adorned with a ton of trinkets on it
First is my Fannstar Belt Gizmo. Held in a GB Fans GB 1 Leather Holster. I will talk about that below
Next is my Officeine Prop Trap Holder. It’s solid metal and required some padding to be added to the back of it so it didn’t rip my suit. It holds my trap
Next is my DoRayEgons Leg Hose Leather Belt Fob Connector that holds the yellow hose from the suit onto the belt.
Next is the 4 vials of slime on a modified Wolfscosplay Belt Holder. These are filled with DollarTree Goofy Goey Slime in 4 colors (Green, Pink, Blue, Purple)
Next is my Franklin Pratt Leather PKE Leather Holster, modified Spirit Halloween PKE meter (for now until I get the Hasbro one). This was modified by Noah Voiding (playday_tng) to allow you to manually move the arms up and down. As well as a Matty Collector PKE Meter.
Next I have DoRayEgons Trap Cable / Hose Leather Holster with Survival Buckle that holds the trap pedal and hose on the belt. This also has a carabiner on it to hold normal keys and my smoke kit remote on it
Lastly I have GB Fans Chemical Gloves and Version 3 Key Fob for hanging the wand
This was originally made by Fannstar. It came with the gizmo itself, daughter board, and holster
I replaced the Fannstar Holster with a GB Fans one ant it's so much better
The daughter board had a belt clip added to it
I bought color changing tea lights from the DollarTree, ripped out the LED bulbs, designed a circuit, hot glued each bulb to the underside of each nixie tube, and wired it all up with a 9 volt battery and some resistors according the circuit. This gives it a glow and changes colors.
The LEDs aren’t perfect so they change colors at different rates giving the gizmo a perfect look
Here is the circuit:
